Bianchi Type-III Cosmological Models with Time Dependent Displacement Vector for Barotropic Fluid Distribution in Lyra Geometry

Bianchi Type-III cosmological models for perfect fluid distribution with time dependent displacement field in the framework of Lyra geometry are investigated. To get the deterministic model of the universe, we have assumed two conditions (i) shear (σ) is proportional to the expansion (θ). This leads to B=C ⁿ where B and C are metric potentials and n is a constant. (ii) Universe is filled with barotropic fluid distribution which leads to p=γ ρ, 0≤γ≤1, p being isotropic pressure and ρ the energy density. The physical and geometrical aspects of the model with a special case and singularities in the models are also discussed.     

Transient and steady state lateral charge transport in polymeric semiconductors

The Lateral photovoltaic effect (LPE) has been used as an effective tool to probe the dynamics of photogenerated charge carriers in conjugated polymer based optoelectronic devices. In this paper, we analyze the time-dependence of LPE in a position sensing device geometry using a discrete circuit equivalent model coupled with a spreading impedance approach. We elucidate the dependence of the lateral photovoltage (LPV) on the position, intensity and the modulation frequency (ω _c ) of the light beam. Previous experimental results for the position and ω _c dependence of the LPV in the steady state are successfully reproduced within the present approach. We predict a clear knee-like feature in the transient regime of the LPV for high photocurrent values. This feature prompts us to propose that the response time of the organic position sensing device decreases sharply with increasing incident intensity.     

The One Step Synthesis of 2-(2-Bromo-5- methoxyphenyl)-5-(3-arylidene)-1,3-thiazolo[3,2-b]- 1,2,4-triazol-6-(5H)-ones and the Evaluation of the Anticonvulsant Activity

A smooth one-step synthesis of 2-(2-bromo-5-methoxyphenyl)-5-(3-arylidene)-1,3-thiazolo[3,2-b]-1,2,4-triazol-6-(5H)-ones (4a–n) is described. The newly prepared compounds are characterized by analytical and IR, ¹ H NMR, ¹³ C NMR, and FABMS spectral analysis. A few compounds are screened for anticonvulsant activity. Compounds 4i and 4n exhibit promising anticonvulsant activity and are recommended for further studies.     

Aqueous Polymerization of Methyl Methacrylate

Aqueous polymerization of methyl methacrylate (MMA), initiated by the potassium bromate-thioglycollic acid (TGA) redox system, has been studied at 30 ± 0.2° C under positive pressure of nitrogen. The rate is given by K[MMA] [TGA] ⁰[KBrO₃]^x where × = 1 for lower KBrO₃ concentrations and 0.5 for higher KBrO₃ concentrations. The reaction has been studied over the 20–45°C range. The activation energy was found to be 65.72 kJ/mol (15.71 kcal/mol) in the investigated range of temperature. Inorganic electrolytes except MnSO₄·4H₂O and Na₂C₂O₄ depress both the rate of polymerization and the maximum conversion. All the alcohols (viz., MeOH, EtOH, iso-PrOH, tert-BuOH) and acetone depress the rate of polymerization as well as the maximum conversion.     

Adsorption and Equilibrium Isotherm Study of Removal of Copper (II) Ions from Aqueous Solution by Chemically Modified Abelmoschus esculentus Fibers

The present study explores surface modification of Abelmoschus esculentus by graft copolymerization reaction using acrylonitrile as a monomer and ascorbic acid/H₂O₂ as a redox initiator. Further, polyacrylonitrile grafted fibers were treated with hydroxylamine to convert the nitrile group of the grafted fiber into the amidoxime group to enhance adsorption of copper ions from wastewater. The graft copolymers and amidoximated fibers were characterized by FT-IR and FE-SEM. The effects of physicochemical parameters such as pH of the solution, initial metal ion concentration, and time on Cu(II) adsorption were studied to optimize condition for maximum adsorption. In addition, Langmuir, Freundlich, and Tempkin models were applied to describe the adsorption isotherm of Cu²⁺ ions.     

Various ways to strengthen the fiber‐matrix interface for enhanced composite performance

Surface treatment (ST) of carbon fibers (CF) leads to an enhancement in fiber‐matrix adhesion. However, it deteriorates the strength of a fiber which makes its reinforcing action less effective in a composite. These effects in opposite directions control the net strength of a composite, and hence, the treatment has to be judiciously applied, which would enhance the first factor and minimize the second one. Authors have recently reported on four effective techniques (using various doses) such as treatments with nanoparticles of Ytterbium fluoride (YbF₃)_, cold remote nitrogen–oxygen plasma (CRNOP), γ‐ray irradiation and nitric acid oxidation. Amongst these methods, nitric acid oxidation is studied in depth in the literature, and γ‐ray irradiation is sparingly studied. However, nano‐YbF₃ and CRNOP were first time reported in the literature by the authors. However, comparative aspects of all these methods were not addressed. In this paper, these aspects in details are discussed to lay down the right criteria for selection of a ST technique of CF to design the desired performance of a composite. The composites with polyetherimide and treated CF (including untreated) were developed and evaluated for various properties including tribological one. Treated CF based composites exhibited excellent mechanical and tribological properties (under harsh operative conditions with wear rates ≈ 1 × 10^?15 m³/Nm and μ ≈ 0.09). It was concluded that for strength and tribo‐performance, different treatments and doses are to be employed. Overall nanosized‐YbF₃ treatment of CF proved to be the most promising ST method. Copyright © 2013 John Wiley & Sons, Ltd.     

Dynamic and Equilibrium Studies on Adsorption of Cu(II) Ions onto Biopolymeric Cross-Linked Pectin and Alginate Beads

Binary biopolymeric beads of alginate and pectin were prepared and characterized by FTIR spectra. On to the surfaces of the prepared beads were performed static and dynamic adsorption studies of Cu(II) ions at fixed pH and ionic strength of the aqueous metal ion solutions. The adsorption data were applied to Langmuir and Freundlich isotherm equations and various adsorption parameters were calculated. The influence of various experimental parameters such as effect of time, pH, temperature, solid to liquid ratio, and the presence of salts were investigated on the adsorption of copper ions.     

Removal of Rhodamine-B from Aqueous Solution by Adsorption onto Crosslinked Alginate Beads

The biosorption of rhodamine-B from aqueous solution using crosslinked alginate beads was studied by contact method at fixed pH ?3 and room temperature (28 ± 0.2°C). Both the Freundlich and Langmuir isotherm models could describe the adsorption equilibrium of the rhodamine-B onto crosslinked alginate beads. The influence of various experimental parameters such as pH, temperature, effect of concentration and time were evaluated. It was observed that the adsorption capacity of rhodamine-B onto alginate beads decreased with increase in pH and temperature above room temperature.